This category shows how I cast bronze figurines, bronze sculptures, and other bronze curios. These are my Work-In-Progress postings.
The sculpture is now mostly complete. I still need to attach a few decorations to the figures and properly clean the work and apply a patina to the bronze. I plan to use liver of sulphur, ferric nitrate, and cupric nitrate chemicals to apply various browns, blacks, red, and green colours to the main piece. […]
Some of the remaining ribbon parts that attach to the base have been cast. After about 6 months of contemplation I have finally decided to cast the base of this sculpture in bronze. I made urethane rubber moulds of the clear resin parts so as to replicate them in wax. Everything except for the large […]
Now that I have cast the main body for Yan Wu it is time to create the flowing ribbons that descend from the back of the figure.These parts are large. I struggled to decide how to economically mould and cast these pieces. I considered sand casting but in the end I decided to mould the […]
This posting shows pictures for some of the casting and construction for this sculpture.
I find that I now want to do sculptures of far more substance and complexity. My work is changing. I do not expect to cast superheros or other such bronze in the future.I am now starting a new sculpture based on Yan Wu by PKKing. This work should be a spectacular bronze piece. According to […]
I now have a functioning water wheel with water. A few still pictures of the operating water wheel follow.The water pump was put into one end of a reservoir fashioned from 1 1/4 inch ABS pipe. The reservoir hold about 350 ml or 1 and a half cups of water. The pump fills the water […]
I am beginning to assemble the water mechanism for the water wheel.The water reservoir will sit underneath the mine office. This reservoir will contain a submerged pump driven by the battery and electronics in the office that will pump water into the water tower. The water will come out of the tower at the bottom […]
The smoke generator for the mine office is now working.Dave Bodnar posted an interesting implementation of a smoke generator that created smoke by burning glycerine using heating coils from electronic cigarettes. Like Dave, my implementation uses KangerTech 1.8 ohm heating element coils to make the smoke. However, my original implementation of his solution, although functional, […]
The mine office and crusher and water wheel are now mostly complete.The water wheel gear assembly went through a few iterations of development. I couldn’t find metal drive gears of the proper size so I thought that plastic drive belts could be used for the gearing. However, I abandoned this plan when I realized that […]
I have started to cast the mine office. This building will contain the water pump and reservoir for the water system and the electric motor with gears and bearings to turn the water wheel at 3 RPM. Switches, batteries, electronics, and solar panels for a self-contained system are all contained in this building.I created the […]
